Nippon Vinilex 2000 Water-Based Wall Sealer 20L | Model: NIP-V2000-20L

$110.09

Nippon Vinilex 2000 Water-Based Wall Sealer 20L | Model: NIP-V2000-20L Formulated with a special acrylic polymer for excellent alkali and efflorescence resistance properties Type: Modified Acrylic Pol

SKU: ktec-7079a430 Brand:

Description

Nippon Vinilex 2000 Water-Based Wall Sealer 20L | Model: NIP-V2000-20L Formulated with a special acrylic polymer for excellent alkali and efflorescence resistance properties Type: Modified Acrylic Polymer Colour: Light Grey Finish: Matt Uses: Specially designed as a sealer for new and old cement rendered surfaces in both internal and external confitions such as: Cement plaster Precasr concrete Cast in-situ concrete Brickwork Hard/Soft boards Partition panels Gypsum Features: Good adhesion Outstanding alkaline resistance Anti-fungus and algae resistance property Excellent efflorescence resistance Fast drying time Easy application Environmentally friendly paint certified under the Singapore Green Building Product Certification Scheme APPLICATION DATA Method : Brush, roller or spray Theoretical Coverage : 14m2/litre (based on 30 microns DFT) Dilution : No dilution is necessary for best performance Surface PRreparation : Ensure surface is clean, dry and stable using the following suggested surface treatments: Moisture :There must not be any water residue on the surface of the substrate. Moisture must be <4% (Sovereign moisture master) before application Unstable matter :Remove loose bonding film, dirt, peeling paint, etc by high-pressure water jet wash or mechanical means such as power brush or scraper, whichever is suitable Contaminants :Remove dust and foreign matter by cleaning with damp cloth. Remove oil or grease using solvent or mild detergent. Allow surface to dry Fungus and Algae :Wash the affected area to remove unstable matters and micro-organisms. Apply Nippon Anti-Fungus Solution and leave on for at least 2 hours Hairline cracks :Fill cracks with suitable exterior grade waterresistant putty or filler Drying Time: Touch Dry – 20 minutes at 30⁰C Hard Dry – 2 hours at 30⁰C Overcoating Time: 2 hours under normal conditions Recommended Painting System: 1 coat of Nippon Vinilex 2000 Water-based Wall Sealer 2 coats of topcoat Cleaning : All equipments should be cleaned with water immediately after use --- **Available SKUs:** - **Default** — ACH: NIP-V2000-20L @ S$110.09

Reviews

There are no reviews yet.

Be the first to review “Nippon Vinilex 2000 Water-Based Wall Sealer 20L | Model: NIP-V2000-20L”

Your email address will not be published. Required fields are marked *