Aiko H Beam Cutter Machine | Model : CG1-2

Description

Aiko H Beam Cutter Machine | Model : CG1-2 Features : Torch Gas hose: connected between torch and gas distributor to deliver gas， Adjusting pilot wheel for transverse: It is to control torch transverse movement. Track Vertical moving bar Reduce speed motor of web plate cutting equipment Quick distributor: Flame is adjusted only once and not adjusted again. Handle: It is to move machine Track pressure plate: Locate machine on the H structural section Clutch knob: Pulling knob on the left side is off, pulling knob on the right side is on. Specification : Model : CG1-2 Weight : 21.5(Kg) Accessory (Track sections) : 15.5(Kg) Machine Dimension Body : 400x340x440(Mm) Track : 270x220x2200(Mm) Speed Control : SCR Control Power Source : AC 220V ± 10% Cutting Speed : 50~750(Mm/Min) Cutting Thickness : 5-50(Mm) Bevel Angle : 0~30⁰ (Wing Plate ; Web Plate) Maximum fly past of web plate cutting : A=1600(Mm) Maximum fly past of wing plate cutting : B=800(Mm) Maximum angle of wing plate slanting cutting 30⁰ Maximum height of slanting cutting 690(Mm) Maximum angle of web plate slanting cutting 35⁰ Maximum length of slanting cutting 1300(Mm) Tip G02(For Acetylene) G03(For Propane) Motor Web Plate Motor : 110V , 30W , 50HZ Rotational Speed : 3600(Rpm) Wing Plate Motor : 110V , 40W , 50HZ Rotational Speed : 2200(Rpm)

—
**Available SKUs:**
– **Default** — ACH: CG1-2 @ S$3357.20